## iboot_blob35.bin

- `smc/inductive/inductivePoutPolicy.cpp`
- `%s: inductive fw handoff to fw_dst=%d in progress`
- `RS: %s: InductiveRemoteSoCInd: remote_soc=%d`
- `recieved FW decriptor: base = 0x%llx size = 0x%x flags 0x%x`
- `inductiveCL: ggp %d ggv %d ggi %d soc %d, btemp %d epi %d, mpwr %d, fr %d`
- `LVR init failed: %d`
- `smc/bms/v1/bms_v1/bms.cpp`
- `NVMIT: i %d`
- `%s: 0x%x -> 0x%x`
- `tchpad: Uninitialized, initializing with version 0x%04x`
- `Error copy ilim values rc:%d`
- `%s:%d disc %llu`
- `%s : %d, %d`
- `%s: fw_vers=0x%x -> fw_mode=%s (state=%d)`
- `inductive cl: pwr contract: none; settle LOW`
- `error: could not map PTx 'Device Type' (0x%x) to VID/PID; ret=%d`
- `Send hibernate SIG`
- `BMS: pack[%d] gauge start fail, skip bootup flag`
- `RS: TX: RS_EVT_DEVICE_TETHERED: cancel poutUntethered timer (%llu)`
- `InductiveCollectFWLogs`
- `smc/inductive/inductive_task.cpp`
- `InductiveSetPowerOutCapability`
- `POP: ovr:%lld h:%d chg=%d soc:%d t:%d isAL=%d pMax=%d pCalc=%lld thrm=%d%% pCfg=%lld`
- `ui8NfcControllerReady: write: power:%d`
- `smc/bms/v1/bms_v1/charger_helper/charger_keys_intf.cpp`
- `%s: RTK_mc_release returned != RTK_ST_OK `
- `ACSt: Failed to read SOC1`
- `configureTxPout`
- `RS: TX: CHC: Pout(%d)<Thrsld(%d) AND Ironbull cloak not available; swapToRxMode`
- `RS: TX: RS_EVT_DEAD_ACCESSORY_DETECTED: Pout(%d)>=Thrsld(%d); stay in TX mode`
- `inductive adapter: (%d)->(%d) dt: %llu`
- `InductiveUpdateChgIlim`
- `RS: %s: InductiveSendLocalTetherToFW: send tether (%d) to fw`
- `smc/bms/v1/charge_control/charge_control.cpp`
- `RS: RX: RS_EVT_DEVICE_UNTETHERED; invoke poutTriggerSet`
- `RS: RX: RS_EVT_ACCESSORY_DETACHED`
- `RS: TX: RS_EVT_DEAD_ACCESSORY_DETECTED: Pout(%d)<Thrsld(%d); swapToRxMode`
- `%s:%d: inductive fw (%d) loaded successfully!`
- `InductiveSetManualMode`
- `Failed to write boot counter data at idx:%d rc:%#x`
- `smc/i2c.cpp`
- `RS: poutUntethered timer expired; hard swap; loadFirmware(RX)`
- `Disconnect re-published`
- `IND: CHG: clear charge rate`
- `%s: fail rd %dB from 0x%x (%d)`
- `transient %d (%d to %d)`
- `%s:%d err freq denom`
- `RS: RX: RS_EVT_DEAD_ACCESSORY_DETECTED; invoke poutTriggerSet`
- `Found FTAB file, valid = %d`
- `InductiveFWLoggerInit`
- `2PP:inductive_data.promotion_to_2pp_state = %u`
- `InductiveUpdateCloakStatus`
- `no_cep_count %d`
- `DPLOSS,ltr: %d`
- `Ind UID Roll pend.`
- `smc/comms.cpp`
- `RS: %s: %s: req-tx-init-rs(ret:0x%08x); start swapToRxModeTimer for %llu ms`
- `%s : quiesce, %d`
- `QIPP1p4 : TX supported : %d, profile: %d `
- `%s:%d sq err cmd %x ccode:%x code:%x`
- `%s:%d cstat bad cmd %x %x %x %x`
- `smc/inductive/inductive_tx.cpp`
- `%s: failed to send free log buf signal (ret=%d)`
- `ILIM_FAIL charger_ilim_cleanup`
- `%s: iSawAnUPO=%d`
- `inductiveCL: crashed %i %d %d`
- `RS: TX FW state moved to Idle`
- `TXDS: notify AP: comms paused`
- `TXDS: %s: stream %d already in progress; skip`
- `TXDS: pout_tx_alloc_stream failed with ret=%d`
- `%s: cap=0x%x, tx_freq_mask=0x%x`
- `BMSScratchpad: Migration failed, zeroing scratchpad`
- `BMSScratchpad: Failed to write migrated data (rc=%d)`
- `Unable to write LVR data to GG for pack %d: %d`
- `RS:  prv: p:%03d m:0x%01x vid:%04x pid:%04x s:%03d c:%03d t:%03d `
- `RS: PTx Info: id=0x%x family=0x%x type=0x%x tether=%d dualr=%d p=%d`
- `DPLOSS,lt<16W %d`
- `flush: %x %x %x %x`
- `InductiveTxUpdate`
- `gg_fw_update_init = %d`
- `Resetting charge timer failed, try again...`
- `ACSt: OSpend Exp`
- `smc/inductive/inductive_adapter.cpp`
- `TXDS: notify AP: comms enabled`
- `InductiveTxProcessRxInd`
- `RS: %s: InductiveTxGetRxSoC: remote_soc change: %d -> %d`
- `ui8NfcControllerReady: write`
- `charger_configure_input_src[%d]: ilim=%u, vlim=%u, src:%u`
- `%s: RTK_mc_register_remote returned status %d (!= RTK_ST_OK) `
- `RS: RX: RS_EVT_WAIKATO_MITIGATION_NOT_READY; invoke poutTriggerSet`
- `RS: TX: RS_EVT_TX_CHIME_HONESTY_COMPLETED; Pout=%d; IBCloakAvailable;=%d`
- `%s: %s:%d: %s, ret=0x%x; q-size=%d; hdr=0x%x`
- `RXDS: AP notify error %d`
- `%s: cps exDBB. np:%d ts:%d ds:%d cf:%d st:%x`
- `BMS: system pack detection state:%d`
- `ACSt: Shdwn 0x%x`
- `ACSt BattTrap: okBootAP_OS: %d, ExitBattPwr: %d, ExitACPwr: %d`
- `RS: RX: RS_EVT_POUT_ABOVE_THRESHOLD; poutTriggerSet`
- `inductiveCL: ramp down: %d`
- `QIPP1p4: newSession.`
- `tx assert triggered!`
- `POP: %s: reset not done; lazy reset`
- `charger_set_charging_parameters`
- `BMSScratchpad: BMSS region not supported, using legacy mode`
- `BMSScratchpad: Read count (%u) exceeds field size (%u), truncating`
- `%d: %llu %d`
- `smc/bms/v1/dynamic_shutdown/battery_dynamic_shutdown.cpp`
- `WLCH: read hdr again (1): ret=0x%x, hdr=0x%x`
- `inductive_mailbox_ind_process`
- `%s: err gdpi (%d)`
- `IND: CHG: request charge rate = %d`
- `WLCH: read aperture magic: ret=0x%x, magic=0x%x`
- `%s: fail init (%d)`
- `%s : quiesce mask, %x`
- `Inductive pwr_prof_change cleared`
- `qInductiveInFwdlRegulation`
- `inductiveCL: sys load high; ilim_max = MIN(sys_trans=%d, ilim_max=%d) = %d`
- `inductiveCL: rp %d rpv %d rpi %d vtgt %d vbase %d itgt %d`
- `BMSScratchpad: Unsupported version 0x%04x`
- `iOS CHI1 = %d`
- `RS: TX: RS_EVT_TX_FW_SUSPENDED (Idle); swapToRxMode`
- `%s: handoff approved`
- `%s: fail log (%d)`
- `%s:%d Failed to get PCB temperature ret=0x%x.`
- `%s:%d failed to read status`
- `DPLOSS,ruf. Pr: %d`
- `BMSScratchpad: Future version detected (0x%04x > 0x%04x), zeroing`
- `BMSScratchpad: Unknown key for BMSS write`
- `%s: pack%d voltage limit changed=%u mV`
- `RS: dead accessory detected!`
- `%s: handoff rejected (%d)`
- `smc/inductive/inductive_keys.cpp`
- `%s:%d vtgt %d ilim tgt %d; (0: not set)`
- `RXIC Went to Sleep`
- `ILIM_FAIL charger_get_ilim %d`
- `ILIM_FAIL VBUS2_PWR_SRC1 %d`
- `Disconnect held off`
- `InductiveRxHandleInterrupt`
- `TXDS: spmi write to 0x%08X: from entry %d bytes %d`
- `RS: kHostTxIdentification; dev_type=0x%x fmly=%d prot=%d qi_ver=0x%x qpp_ver=0x%x`
- `ui8MagnetEvent: write: state:%d`
- `BMSScratchpad: Checksum verification failed, zeroing scratchpad`
- `POP: TXFW: %s: drct: %u (targ) | %u (program)`
- `%s: chip vfy fail`
- `%s:%d fail control %x SerializerMute`
- `%s: process event %d`
- `ULTRA: power_rampdown_mw=%u coex_pwr_limit=%u vtgt_max=%u prect=%u vrect_base=%u`
- `TXDS: %s: error: unknown evt = %d`
- `BMS: pack[%d] gauge start fail, skip critical`
- `InductiveTarget`
- `InductiveUpdate`
- `exDBB , vb: %d, time: %lld.%ds`
- `no_cep clear`
- `InductiveTxApplyBootFlagsFromFW`
- `smc/inductive/poutPolicy.cpp`
- `Error accessing scratchpad key '%s', rc=%d`
- `dram_region_release`
- `FTAB debug word %d, 0x%x`
- `RXDS: rdsema error %d`
- `inductive cl: G4_C1 : %d`
- `%s: fail sleep ack, ret=0x%x`
- `BMSScratchpad: Failed to read key=%d from legacy region (rc=%d)`
- `BMS: Pack[%d] SOC1 set`
- `InductiveFWDownload`
- `%s : !quiesce mask, %x`
- `exDBB MainFW here`
- `charger: Failed to set Vmax_NCC to:%umV rc:%d`
- `RS: RX: RS_EVT_ROLE_SWAP_REQUEST_SENT; Rcvd PTx Rsp: Reject(%d); stay in RX mode`
- `%s: bad addr range 0x%x-0x%x`
- `inductive cl: %s: start ramp (isns:%dmA, vrect:%dmV, power:%dmW)`
- `detect mgnt %d. dt: %llu at: %llu`
- `TXDS: notify AP: comms resumed`
- `InductiveTxLogFreebuf`
- `ui8NfcControllerReady called for unrecognized key: 0x%X`
- `BMSScratchpad: Failed to read BMSS region (rc=%d), zeroing scratchpad`
- `BMSScratchpad: Unknown key for BMSS read`
- `BMSScratchpad: write_bmss_region called with null PMU`
- `Critical Shutdown Requested`
- `DE: invalid checksum SMC %d AP %d`
- `RS: TX: RS_EVT_HLOS_BOOTED`
- `RS: %s: InductiveRemoteTetherInd: remote_tethered=%d`
- `%s:%d HIGH_TEMP reached. batt %d pcb %d chip %d`
- `RS: RX: RS_EVT_DEAD_ACCESSORY_CLEARED; invoke poutTriggerSet`
- `RS: TX: RS_EVT_POUT_BELOW_THRESHOLD; Ironbull cloak not available; wait for CHC`
- `WLCH: ret=0x%x bufIdx=%d, bufAddr=0x%x, hdr=0x%x`
- `ui8InductiveFWCtrl`
- `QIPP1p4: rx_qipp_version=%x, tx_qipp_version=%x, txhwref=%u vtgt_ironman_ultra=%u`
- `InductiveEnablePeriodicTimer`
- `RS: kHostTxChimeDecision: dcsn=%d prm=%d`
- `getInitialPoutMax`
- `ILIM_FAIL charger_ilim_backoff_state_handler`
- `RS: %s: %s: acc dead: loadFirmware(TX)`
- `2PP:inductive_data.promotion_to_2pp_state timeoutt`
- `%s:%d ERR set mmode (%d) %x`
- `inductive cl: pwr contract timeout; ce=%d, rpp=%d, pc=%d`
- `inductiveCL: vr %d ir %d vm %d im %d hdrm %i frz %d stale %d`
- `%s:%d ironman %llu`
- `InductiveFrequency`
- `vInductiveProcessWork`
- `Shutdown flags: Battery=%d, PMU=%d, pwrOut=%d Override=%d`
- `ACSt: AC present`
- `%s:%d mpp %llu`
- `%s: fail wm (%d)`
- `%s:%d err fsk demod rate`
- `inductive cl: reached ramp target (isns:%dmA [tgt:%dmA], vrect:%dmV [tgt:%dmV], power:%dmW)`
- `In Main without FWDL, returning to FWDL state.`
- `inductive cl: get vmax %d`
- `RS: TX: RS_EVT_ACCESSORY_DETACHED; loadFirmware(RX)`
- `swapToRxMode`
- `Disconnect %s. fD %llu, pD %llu, cUp %llu`
- `RS: NfcTagInfoChangedInd: cnt=%d tag:[0x%x 0x%x]`
- `WLCH: read hdr again (2): ret=0x%x, hdr=0x%x`
- `%s:%d mmode (%d)`
- `%s:%d powering on normally`
- `%s:%d fail reply q: %x %x %x %x`
- `%s: battery_set_charging_parameter failed`
- `BMSScratchpad: read_bmss_region called with null PMU`
- `RS: TX: RS_EVT_DEVICE_UNTETHERED: start poutUntethered timer for %llu ms`
- `RS: %s: invoke drv_inductive_hal.role_swap_preferred(%d)`
- `RS: %s: fw not running (%d); cannot send tether state (%d) to fw; return`
- `ret == RTK_ST_OK`
- `cloak entry`
- `ACSt: iBoot HP %d Lp %d OS=%d ACSt 0x%02x AC %d GG %d ACPW %d SOC1 %d SMCFixturePresent %d`
- `%s:%d DBB 15 minute system uptime timeout`
- `RxInit: Only VBUS2 present (force_dbb_simulation=%d); st->DBB`
- `DPLOSS,rts: %d`
- `InductiveTxDSEvent`
- `POP: TXFW: pout_set_power_limit failed; ret=%d`
- `RS: TX: RS_EVT_ROLE_SWAP_REQUEST_RECEIVED; FW Sent Rsp: Reject(%d); stay in TX mode`
- `inductive_adapter_update_state`
- `%s: No valid firmware!!!`
- `RXDS: rmerr queue %d`
- `inductive_backpower_irq_process`
- `%s: init pass`
- `TXDS: InductiveTxAddToTxStream failed with ret=%d`
- `smc/extPwriOS.cpp`
- `RS: TX: RS_EVT_ACCESSORY_ATTACHED`
- `RS: %s: HLOS booted! notify in %d ms`
- `inductive toggle vbus 0x%x`
- `inductiveCL: ilim_max %d = %d / MAX(%d, %d) `
- `%s:%d status OK but state unknown.`
- `QIPP1p4 : kest: %d, profile: %d, mppVer: 0x%x`
- `TXDS: %s: stream_id=%d out of range`
- `baseline arcas`
- `inductive_quiesce_task`
- `%s: ignore attempt to set ilim=%d in DBB (bcm5935x_state=%d); nop`
- `DPLOSS,st: %d`
- `%s: wq full, drop:%d`
- `TXDS: rmerr queue %d`
- `pending, waiting for debounce`
- `inductive cl: g3: g3(%d) > 98; pwr_c = %dmW (bounded: %dmW); settle ULTRA`
- `inductiveCL: pwr limited %d, base pwr %d `
- `read_status failed; ret=%d`
- `%s: fail clear int, ret=0x%x`
- `BMSScratchpad: key=%d mismatch between BMSS and legacy regions`
- `DE: Checksum becomes valid SMC %d AP %d`
- `POP: TXFW: %s: ramp: %u (targ) | %lld %+lld => %u (program)`
- `%s: ignore attempt to set ilim=%d while quiesced`
- `inductiveCL: ilim frozen = %i`
- `ind hb failed %d %d`
- `InductiveProcessEvents`
- `inductive coex: ilim %d`
- `%s:%d ERR process backpower request %x`
- `Error setting input current limit rc:%d idx:%d`
- `RS: TX: RS_EVT_WAIKATO_MITIGATION_NOT_READY; swapToRxMode`
- `RS: %s: poutTrig:    pass: (t=%d,os=%d,cap=%d,c=%d) . (ibcs=%d | nch=%d | >minpwr=%d) (Pout:%d)`
- `inductive cl: g3: gain3(%d) < 98; settle HIGH; request NPP`
- `%s:%d:tx:read_status failed; reset inductive ic`
- `TXDS: fw failed to transmit all data in stream=%d`
- `InductiveSendHandoffResponse`
- `smc/bms/v1/bms_v1/battery.cpp`
- `upo_periodic_action`
- `dram_region_assume`
- `%s:%d inductive fw (%d) download failed`
- `%s:%d vtgt fail`
- `inductiveCL: ilim limiting %i %i`
- `TXDS: [%d %d]`
- `RXDS: retry %d`
- `Error checking charger VBUS rc:%d`
- `ILIM_FAIL charger_set_path_priority`
- `RS: RX: RS_EVT_ACCESSORY_UNTETHERED; invoke poutTriggerSet`
- `%s:%d Failed to get chip temperature ret=0x%x.`
- `%s:%d fail sbpow`
- `DPLOSS,clts: %d`
- `dram_region_map_region`
- `Pack[%d] Shutdown flags: Battery=%d reason=0x%x`
- `RS: RX: RS_EVT_WAIKATO_MITIGATION_READY; invoke poutTriggerSet`
- `RS: TX: RS_EVT_ROLE_SWAP_REQUEST_RECEIVED; FW Sent Rsp: Accept; loadFirmware(RX)`
- `RS: %s: poutTrig: pending: (t=%d,os=%d,cap=%d,c=%d) . (ibcs=%d | nch=%d | >minpwr=%d) (Pout:%d)`
- `inductive cl: G3_C1 : %d`
- `inductive cl: g4: g4(%d) > %d; pwr_c = %dmW (bounded: %dmW); settle ULTRA`
- `QIPP1P4 %d: Switch profile f %u to %u`
- `vBMSTaskStop fail`
- `iBoot CHI1 = %d ignored`
- `charger_set_termination_voltage`
- `RS: RX: RS_EVT_ROLE_SWAP_REQUEST_SENT; Rcvd PTx Rsp: Accept; loadFirmware(TX)`
- `%s:%d: read failed. resetting %d`
- `DPLOSS,a: %d`
- `%s: RTK_mc_assume returned != RTK_ST_OK `
- `%s: fail dpi addr rd (%d)`
- `inductive cl: arcas init`
- `inductiveCL: updating ilim (%i) %i + %i = %i`
- `DPLOSS,nicl: %d`
- `DPLOSS,icl: %d`
- `RXIC Woke Up`
- `%s: upo_state=%d, clear_upo_on_connect=%d`
- `RS: RX: RS_EVT_DEVICE_TETHERED; invoke poutTriggerSet`
- `Found file entry, tag = 0x%x, offset = 0x%x, size = 0x%x, fw_tag = 0x%x`
- `%s: failed to send handoff resp signal (ret=%d)`
- `DPLOSS,ssto: %d`
- `InductiveTxSendData`
- `%s:%d connecting %llu`
- `inductive_update_firmware`
- `InductiveFWErrorRecovery`
- `%s : nexDBB, tctnRP: %d %d %x`
- `%s:%d: read failed. resetting %d`
- `%s:tx:haltReason %d -> %d`
- `ACSt: boot AC`
- `ACSt: boot !AC`
- `TXDS: %s: terminated transactions due to disconnect`
- `BMSScratchpad: Write count (%u) exceeds field size (%u), truncating`
- `BMSScratchpad: Valid BMSS data found (version=0x%04x)`
- `DE: correcting shutdown_threshold from %d to %d`
- `ACSt: ACpend Exp %d mS `
- `inductive_adapter_update_published_details`
- `inductive cl: g4: gain4(%d) < %d; settle LOW`
- `CHI NOTIF failed`
- `InductiveTxResetTxStreams`
- `BMSScratchpad: Not initialized, call init() first`
- `smc/crashlog.cpp`
- `RS: TX: RS_EVT_POUT_BELOW_THRESHOLD; Ironbull cloak not available; swapToRxMode`
- `%s:%d vb dis %d`
- `%s:%d arcas %llu`
- `ULTRA: hv_gate=%u 9W_time=%llu 7W_time=%llu`
- `DPLOSS,s:TPr:%d,TVr:%d`
- `Error getting LVR data from PMU for pack %d: %d`
- `RS: RX: RS_EVT_ACCESSORY_ATTACHED`
- `failed to exit cloak`
- `RS: TX: RS_EVT_WAIKATO_MITIGATION_READY; do nothing`
- `poutTriggerSet`
- `RS: %s: local tether state %d -> %d`
- `inductiveCL: ilim limiting (ovp) = %i`
- `BMSScratchpad: Performing migration from version 0x%04x to 0x%04x`
- `RS: swapToRxTimer timer expired; hard swap; loadFirmware(RX)`
- `inductive_get_dlog_public_info`
- `ESP: camera_bitmask: 0x%x -> 0x%x`
- `DPLOSS,nt%d: TPr:%d,TVr:%d`
- `ULTRA: allow_crx_switching=%u txVBoostMax=%u vBoostMaxReached=%u crx_power_target_limit=%u`
- `TXDS: st_pout_tx_start_transfer failed with ret=%d`
- `ui8MagnetEvent called for unrecognized key: 0x%X`
- `%s: fail dpi rd from 0x%lx (%d)`
- `%s:%d fail set vbus`
- `cloak exit`
- `%s:%d qc/t wrong: %d %x %x %x %x`
- `RS: RX: RS_EVT_FW_DOWNLOADED received; invoke poutTriggerSet`
- `BMSScratchpad: Migration successful (v0x%04x -> v0x%04x)`
- `RS: stop dead batt detection; expireTime:%llu->0; currTime=%llu`
- `BMS: Failed to read SOC1 for pack[%d]`
- `ACSt:okBootAP_OS: %d, BattPwr: %d, ACPwr: %d, FixtureMode: %d`
- `RS: notify HLOS booted! (hlosBootedNotifDelayTimer expired)`
- `cloak timeout (detect=%d full=%d)`
- `%s:%d sq emp cmd %x %x %x`
- `TXDS: notify AP: comms disabled; comms paused`
- `TXDS: error: InductiveTxGetTxStreamEntry error; ret=%d`
- `Panic forced due to inductive FW crash`
- `InductiveSetHLOSBooted`
- `RXDS: AP notify retry %d, buff %d`
- `%s:%d ctrace cmd %x ccode:%x code:%x %x`
- `smc/forceKeyAccess.cpp`
- `BMSScratchpad: Old version detected (0x%04x), migrating to 0x%04x`
- `smc/inductive/inductive_common.cpp`
- `Error: could not map NFC Tag Id (0x%x) to VID/PID; ret=%d`
- `%s: unknown key = %d`
- `%s :rerror: %x %x %x st %x sa %x`
- `inductiveCL: crx_tgt_pwr=%dmW, rampdown_pwr=%dmW (stepdown=%dmW), vrect_target=%dmV`
- `POP: %s: adP=%d pct=%d initPoutMax=%d`
- `BMSScratchpad: Failed to write zeroed BMSS region (rc=%d)`
- `RS: RX: RS_EVT_HLOS_BOOTED; invoke poutTriggerSet`
- `RS: TX: RS_EVT_POUT_CAPABLE`
- `smc/inductive/inductive_rx.cpp`
- `%s:%d fail rstat`
- `DPLOSS,lt. TPr:%d,TVr:%d`
- `Ind UID Roll done: %x %d`
- `RS: [new: p:%03d m:0x%01x vid:%04x pid:%04x s:%03d c:%03d t:%03d]`
- `RS: start dead batt detection; expireTime=%llu currTime=%llu`
- `vInductiveCmd`
- `vInductiveTaskStop fail`
- `TXDS: %s: unexpected data stream size`
- `RS: RX: RS_EVT_POUT_CAPABLE; invoke poutTriggerSet`
- `WLCH: get_rx_buffer_base_addr() failed; (0x%x) (r:%d); state=exception`
- `%s:%d ERR process mailbox indication %x`
- `%s:%d set mute %d at %llu time.`
- `DPLOSS,e:%d`
- `InductiveTxStreamControlRxInd`
- `smc/iphone/nfc.cpp`
- `ULTRA: new_vrect_target=%u new_base=%u power_factor=%u rpp_prect=%u`
- `%s:%d !RTK_arch_in...`
- `%s:%d sema but no work %x`
- `TXDS: deque tx pkt: stream=%d start=%d end=%d bytes=%d`
- `TXDS: %s: [%d %d]`
- `BMSScratchpad: Failed to mirror key=%d to legacy region (rc=%d)`
- `smc/event_buf.cpp`
- `%s: cloak request %x`
- `ProfSel : TXinfo : %d, prof: %d, fp: %d lk: %d, pc: %d `
- `smc/inductive/inductiveRoleSwap.cpp`
- `charger: Failed to set termination voltage to:%umV rc:%d`
- `smc/bms/v1/bms_v1/charger.cpp`
- `RS: TX: RS_EVT_DEAD_ACCESSORY_DETECTED;  wait for CHC`
- `inductive_adapter_disconnect_debounce`
- `%s:%d failed to set backpower`
- `%s: rd %dw from 0x%x in %dms (%d)`
- `%s : !quiesce, %d`
- `Pack[%d] Shutdown VPMax bounds: floor=%d ceil=%d vpmax_vcut=%d iss=%d vbat=%d dod=%d temp=%d.`
- `RS: TX: RS_EVT_FW_DOWNLOADED: device untethered; start poutUntethered timer for %llu ms`
- `InductiveAccessoryInfoChanged`
- `%s :nexDBB, disc: %d %d %x`
- `ui8NfcControllerReady: write: power:%d, sc`
